| TXSETCC776 |
This Change Control updates the existing 2010-734 Change Control for Switch Hold. This new Change Control breaks out Switch Hold into Switch Hold for Tampering and Switch Hold for Payment Plan. |
| TXSETCC777 |
Adding new codes in the REF~8X to Add Payment Plan Switch Hold and two removal codes -- (1) for Switch Hold Removal due to Tampering and (1) Switch Hold Removal for Payment Plan Switch Hold at the request of the REP of Record. |
| TXSETCC778 |
This Change Control adds a new code "R" to the existing Change Control 2010-747 for the 814_20 transaction only. Adding the "R" code in the 814_20 will remove the AMSM/AMSR code in the event a meter is replaced with non-AMS meter. |
| TXSETCC779 |
This Change Control appends to 2010-748 to sync up the transaction names due to being inadvertently left out. |
| TXSETCC780 |
Gray box language added to a new REF segment (REF~SH) notifying a POLR that a Tampering Switch Hold existed prior to the Mass transition. This Change Control replaces 2010-735 and Change Control 2010-768. |
| TXSETCC781 |
The Critical Care Change Controls have been consolidated into this new Change Control. This Change Control replaces 2010-738, 2010-757, 2010-764, 2010-765, 2010-767, 2011-773, and 2011-774. |
| TXSETCC782 |
Add the "DUP" reject code to be a valid rejection reason in the 650_02 transaction to indicate a duplicate 650_01 was received by the TDSP. Also clarifying DC005 "Disconnect due to tampering" is really a "Disconnect for non-payment of charg... |
| TXSETCC783 |
This Change Control appends to 2010-760 and 2010-761 to add codes for Light Emitting Diode and Wi-Fi to the 867_02 due to being inadvertently left out. |
| TXSETCC784 |
Adding new Cancel Code of CMO "Cancel Move Out" to the 814_08 transaction. |
| TXSETCC785 |
Add the new reject code of "TCC" to notify all REPs that the TDSP has completed a competing transaction for the same scheduled date. Also add the Complete Unexecutable code "T024" to the REF~G7 segment of the 814_28 and 650_02. Add new code... |
| TXSETCC786 |
Requesting two new SAC04 codes for the Oncor service area. |
| TXSETCC787 |
Update the 814_04 REF~IX gray box. REF~IX is not optional when REF~MT = COMBO. |
| TXSETCC788 |
Clarification in the gray box of the REF~MR segment that only one REF~MR segment will be sent for each transaction. |
| TXSETCC789 |
This Change Control is to incorporate changes that will be put into place with changes to the Critical Care Form. |
| TXSETCC790 |
This Change Control is to add clarity to many different segments in various previous Change Controls: PER~PO segment, REF~1P segment and the REF~RAA segment. |
| TXSETCC791 |
Add a new SAC04 code of "MSC054" for RATE CASE EXPENSE SURCHARGE 2. |
| TXSETCC793 |
This Change Control will update the "DC005" code of the 650_01 to make the Friday Authorization flag required in any disconnection request relating to nonpayment. |
| TXSETCC794 |
Make the "Unmetered Service Type" found in the REF~PRT segment "Optional" for the TDSP when the information is available at the time the 814_20 Create transaction is established and communicated to ERCOT. |
| TXSETCC795 |
Change control 2011-781 left off the NM102 segment and the NM108 segments which are required for ANSI compliance. The change is to propose that the NM102 should be a C and the NM108 will be an EC. |
| TXSETCC796 |
This change control clarifies that several segments will not be provided in the 810_02 for the new "A5" Meter Tampering Charge invoice that was approved in 2010-755. |
| TXSETCC797 |
Update TX SET Example documents to be in line with TX SET 4.0 Implementation Guide changes. |
| TXSETCC798 |
Updating the 814_24 to allow only the CSA CR to submit the REF~2W and create new reject reason for ERCOT |
| TXSETCC799 |
Clarifies the current description shown in the REF~8X~TE003 of "PCB" Purpose Code to show it as "Investigate Transformer Leaking" in the 650_01 and 650_02. |
