Issues

NPRR072

Title	Day-Ahead RMR Settlement Clarifications
Next Group
Next Step
Status	Approved on 07/17/2007
Effective Dates	12/01/2010 or per the Nodal Protocol Transition Plan http://www.ercot.com/mktrules/protocols (08/01/07 Nodal Protocols Library)

Date	Gov Body	Action Taken	Next steps
07/17/2007	BOARD	Approved
06/28/2007	TAC	Recommended for Approval	Board consideration of NPRR and IA.
06/21/2007	PRS	Recommended for Approval	TAC consideration

Date

Gov Body

Action Taken

Next steps

07/17/2007

BOARD

Approved

06/28/2007

TAC

Recommended for Approval

Board consideration of NPRR and IA.

06/21/2007

PRS

Recommended for Approval

TAC consideration

Date	Gov Body	Motion	Result
07/17/2007	BOARD	Approve NPRR072 as recommended by TAC	Passed
06/28/2007	TAC	to recommend approval of NPRR072 and endorse the Baseline 2 IA as recommended by PRS.	Passed
06/21/2007	PRS	To recommend approval of NPRR072, as submitted, endorse the IA, and forward documents to TAC.	Passed

Date

Gov Body

Motion

Result

07/17/2007

Approve NPRR072 as recommended by TAC

Passed

06/28/2007

to recommend approval of NPRR072 and endorse the Baseline 2 IA as recommended by PRS.

Passed

06/21/2007

To recommend approval of NPRR072, as submitted, endorse the IA, and forward documents to TAC.

Passed

Status:	Approved
Date Posted:	Jun 18, 2007
Sponsor:	ERCOT Staff
Urgent:	No
Sections:	4.6.2.3.1 Day-Ahead Make-Whole Payment; and 4.6.2.3.2 Day-Ahead Make-Whole Charge
Description:	This NPRR modifies the Day-Ahead Make-Whole Payment calculation such that an Amount data cut is not calculated for an eligible Reliability Must Run (RMR) Unit; consistent with the Protocol requirement prohibiting RMR Units from receiving payment through the Day-Ahead Make Whole Payment.
Reason:	This NPRR provides for consistent treatment of RMR Units in Day-Ahead settlement calculations, in that an "AMT" data cut is not created for RMR Units via the Day-Ahead Energy Payment or the Day-Ahead Make-Whole Payment. Removing the Day-Ahead Make-Whole Payment Amount data cuts (DAMWAMT) for RMR Units reduces the potential for confusion because all DAMWAMT data cuts received by a Qualified Scheduling Entity (QSE) will support the DAMWAMT value provided on the statement.