Per AEP they have a way to provide this information on the 867_03 as they currently do today for PTB customer and are willing to pull this issue from TX SET. This issue is bigger than TX SET or any of the working groups because of the Settlement, QSE implications as well as usage and consumption. The outcome/resolution could involve several working groups and subcommittees to determine the best solution for the Market. TX SET Chair will take this issue to RMS for the March 2007 meeting to be incorporated into an RMS Issue document for their guidance on next steps.
Per AEP they have a way to provide this information on the 867_03 as they currently do today for PTB customer and are willing to pull this issue from TX SET. This issue is bigger than TX SET or any of the working groups because of the Settlement, QSE implications as well as usage and consumption. The outcome/resolution could involve several working groups and subcommittees to determine the best solution for the Market. TX SET Chair will take this issue to RMS for the March 2007 meeting to be incorporated into an RMS Issue document for their guidance on next steps.
Currently, AEP will not allow a bi-directional meter to run backward – NET Zero--- plans would be to bill on the positive usage for billing by the TDSP and let the CR buy-back on the negative value from the meter. 867_03 does not support negative values in usage. At this time hold off assigning a sub-team to discuss and recommend possible changes to the 867_03 until after discussion is held with Metering Group. TX SET Leadership will consult Competitive Metering/Metering Working Groups to determine what type of metering equipment should be utilized for this type of application.
Background
Status:
Closed
Date Posted:
01/25/2007
Sponsor:
AEP
Urgent:
No
Sections:
867_03
Description:
We are in the final stages of approving a customer request to connect a solar system to the AEP Texas grid. This customer has indicated he will be selling his excess output to back to his CR. AEP has installed a single meter with two registers ( kwh in and out). The 867_03 does not support sending both the "kwh in" and, the "kwh out" readings.
Reason:
Need ability to pass both the œKWH in and KWH ou€? readings on the same 867_0
