| TXSETCC726 |
Revised PUCT Subs. rule 25.181 allows for the breakout of the Energy Efficiency Cost Recovery Factor (EECRF) from TDSPs base rates. |
| TXSETCC727 |
TX Set Transaction Guide should specify the reject reason RNE (Request Not Eligible) for ERCOT use only. |
| TXSETCC728 |
The 867_03 TX SET Guide in the N1~8S segment the N106 is missing the 40 for Receiver for ERCOT Read Load transactions. |
| TXSETCC729 |
Remove examples from Implementation Guides and create separate documentation to allow for quicker correction and addition of new examples without a TX SET release |
| TXSETCC730 |
Changing the term on-cycle to reflect Standard Switch and off-cycle to reflect Self Selected Switch in all affected TX SET Guides |
| TXSETCC731 |
Update the TX SET Guides with correct information. |
| TXSETCC732 |
Remove SAC04 guides from the 810_02 and 810_03 guides. A new document will be created to allow changes outside of a release. |
| TXSETCC733 |
Discontinue use of the following transactions submitted to ERCOT by a CR 814_07, 814_09, 814_13, 814_15, 814_19, 814_21, 814_23, & 814_29. |
| TXSETCC734 |
New REF Segment to the 814_20 with Switch Hold Add and Removal and new Reason for Change added to REF~TD segment to support Meter Tampering Rulemaking |
| TXSETCC736 |
In order to reject a Move In or Switch which currently has a Switch Hold, a new reject code of SHF will be added to the appropriate transactions. |
| TXSETCC739 |
Changes are required to the 814_PC in order for the TDSPs to receive customer contact information for power outages and service restoration |
| TXSETCC740 |
If the 814_27 is received with REF~1P~HUU (Status Reason) HISTORICAL USAGE UNAVAILABLE, ERCOT should close the Business Process Instance (BPI) and the 867_02 transaction should not be expected by the CR or ERCOT |
| TXSETCC742 |
Addition of new reject code ACR - Acquisition Cancel Reject to be used when a CR submits an 814_08 on a Acquisition |
| TXSETCC743 |
Addition of new reject code CW1 for use when a CR submits an 814_08 or 814_12 within 1 day of Scheduled Meter Read |
| TXSETCC745 |
Add the ability for a TDSP to Complete Unexecutable a Switch. |
| TXSETCC746 |
TX SET Guide changes by transaction required to support Acquisition Transfer |
| TXSETCC747 |
In order to provide REPs information on whether an ESI ID has a provisioned Advanced Meter installed at the premise, a new REF segment will be added to the 814_04, 814_05, 814_14, 814_22 and 814_20 |
| TXSETCC748 |
The purpose of this Change Control is to sync the names of the Texas SET Guide transactions, with the names of the transactions in Protocol and the Retail Market Guide. |
| TXSETCC749 |
Explanation of the 2 options for the REF~IK segment in the 810_03 transaction |
| TXSETCC750 |
Add new SAC04 codes to the 810_02 transaction. |
