Texas SET Change Controls
View all of the Texas Standard Electronic Transaction (SET) Change Controls that have been created and submitted to the Texas SET Working Group as a result of issues submitted by Market Participants through the Texas SET Issues Process.
This includes all New and Pending (Under Review) Change Controls, those that have been Approved for future Texas SET versions, as well as all Withdrawn and already Implemented Change Controls.
Texas SET Change Control Submission Process
The process for submitting a new Texas SET Change Control is detailed in the Texas SET Working Group Procedures (found on the Texas SET Working Group page).
Recommended for Approval
| 797 | Update TX SET Example documents to be in line with TX SET 4.0 Implementation Guide changes. |
Approved
| 794 | Make the “Unmetered Service Type” found in the REF~PRT segment “Optional” for the TDSP when the information is available at the time the 814_20 Create transaction is established and communicated to ERCOT. |
Approved for Next Texas SET Version
| 706 | TX SET guide for 814_24 allows a Communication Number Qualifier of "EM" for Electronic Mail. This allows the submitter of the 814_24 to specify an email address as the contact type in the PER segment. |
| 718 | Currently, it seems that ERCOT is canceling 814_24 Move-outs after receiving the 814_16 transaction for "MOVE OUT CANCELLED DUE TO AN INCOMING MOVE IN". ERCOT did not wait to receive the 814_04 transaction before sending the Non-Response driven Cancel. |
| 720 | Add code A78 "Item or Service already Established (Requested action has already completed)" as a valid reject reason to the 814_29. |
| 722 | IG currently requires Originating Tran ID and Estimated Restoration Date whenever purpose code = "79". It is actually only required when purpose code = 79 AND Suspension/Reactivation code = RC001. Causing false rejection of a 650_04 Reactivate after disconnect for denial of access when Originating Transaction ID and Estimated Restoration Date is not also included. |
| 733 | Discontinue use of the following transactions submitted to ERCOT by a CR 814_07, 814_09, 814_13, 814_15, 814_19, 814_21, 814_23, & 814_29. |
| 734 | New REF Segment to the 814_20 with Switch Hold Add and Removal and new Reason for Change added to REF~TD segment to support Meter Tampering Rulemaking |
| 736 | In order to reject a Move In or Switch which currently has a Switch Hold, a new reject code of SHF will be added to the appropriate transactions. |
| 739 | Changes are required to the 814_PC in order for the TDSPs to receive customer contact information for power outages and service restoration |
| 740 | If the 814_27 is received with REF~1P~HUU (Status Reason) HISTORICAL USAGE UNAVAILABLE, ERCOT should close the Business Process Instance (BPI) and the 867_02 transaction should not be expected by the CR or ERCOT |
| 742 | Addition of new reject code ACR - Acquisition Cancel Reject to be used when a CR submits an 814_08 on a Acquisition |
| 743 | Addition of new reject code CW1 for use when a CR submits an 814_08 or 814_12 within 1 day of Scheduled Meter Read |
| 745 | Add the ability for a TDSP to Complete Unexecutable a Switch. |
| 746 | TX SET Guide changes by transaction required to support Acquisition Transfer |
| 747 | In order to provide REPs information on whether an ESI ID has a provisioned Advanced Meter installed at the premise, a new REF segment will be added to the 814_04, 814_05, 814_14, 814_22 and 814_20 |
| 748 | The purpose of this Change Control is to sync the names of the Texas SET Guide transactions, with the names of the transactions in Protocol and the Retail Market Guide. |
| 749 | Explanation of the 2 options for the REF~IK segment in the 810_03 transaction |
| 751 | Adding new codes Force Majeure Event (FME) and Weather Moratorium (WTM) |
| 752 | Remove incorrect link for locating ISO country codes from TX SET implementation Guides |
| 753 | Create a new code in both the 650_01 and 650_02 transactions that will allow a CR to notify a TDSP when a customer has installed some type of generation equipment at the premise |
| 754 | Add a new code to allow a CR to notify a TDSP when a customer has an Electric Vehicle as an end-use device at a premise. |
| 755 | In order for the TDSP to send discretionary charges due to tampering a new type code should be added to the 810_02 |
| 756 | Cleanup after 3.0A to have off-cycle updated to reflect self selected |
| 759 | Add a new REF segment to the 814_16, 814_24 and 814_03 to provide key information to the TDSP about a condition that may affect the execution of a MVI, MVO or MVO to CSA |
| 760 | Add a new code in the ESIID attributes to specify LED bulb types for Unmetered Service type |
| 761 | Add to the existing REF02 of the REF~PRT segment the "WF" code to represent Wi-Fi (Wireless Fidelity). |
| 762 | Discontinue use of the 650_05 response transaction that doesn't provide or require a response by the TDSP once received. |
| 766 | In order to provide codes that are more specific than "Other" with a text explanation, TX SET shall add a new code T023 to the REF~G7 for Move Out treated as a force off due to Move In scheduled for same date. |
| 770 | New code needed for clarification of Complete Unexecutable situations when the TDSP places a Switch Hold on an ESIID preventing completion of a MVI or Switch. |
| 771 | Clarification of the gray box language further for the REF~1P~HIU code that was modified and approved in Change Control 2010-740 |
| 772 | Modifications to Change Control 2010-753 to remove Electric Vehicles (which was Approved in 2010-754) from the Purpose Code and only applying the new FI012 Purpose Code to Generation devices at the premises. |
| 775 | Add grey box to the DC005 purpose code of the 650_01: This code authorizes the TDSP to disconnect service at any location accessible to them, which includes premium disconnect location. |
| 776 | This Change Control updates the existing 2010-734 Change Control for Switch Hold. This new Change Control breaks out Switch Hold into Switch Hold for Tampering and Switch Hold for Payment Plan. |
| 777 | Adding new codes in the REF~8X to Add Payment Plan Switch Hold and two removal codes – (1) for Switch Hold Removal due to Tampering and (1) Switch Hold Removal for Payment Plan Switch Hold at the request of the REP of Record. |
| 778 | This Change Control adds a new code "R" to the existing Change Control 2010-747 for the 814_20 transaction only. Adding the “R” code in the 814_20 will remove the AMSM/AMSR code in the event a meter is replaced with non-AMS meter. |
| 779 | This Change Control appends to 2010-748 to sync up the transaction names due to being inadvertently left out. |
| 780 | Gray box language added to a new REF segment (REF~SH) notifying a POLR that a Tampering Switch Hold existed prior to the Mass transition. This Change Control replaces 2010-735 and Change Control 2010-768. |
| 781 | The Critical Care Change Controls have been consolidated into this new Change Control. This Change Control replaces 2010-738, 2010-757, 2010-764, 2010-765, 2010-767, 2011-773, and 2011-774. |
| 782 | Add the “DUP” reject code to be a valid rejection reason in the 650_02 transaction to indicate a duplicate 650_01 was received by the TDSP. Also clarifying DC005 “Disconnect due to tampering” is really a “Disconnect for non-payment of charges associated to Tampering”. |
| 783 | This Change Control appends to 2010-760 and 2010-761 to add codes for Light Emitting Diode and Wi-Fi to the 867_02 due to being inadvertently left out. |
| 784 | Adding new Cancel Code of CMO “Cancel Move Out” to the 814_08 transaction. |
| 785 | Add the new reject code of "TCC" to notify all REPs that the TDSP has completed a competing transaction for the same scheduled date. Also add the Complete Unexecutable code "T024" to the REF~G7 segment of the 814_28 and 650_02. Add new code "TDR" for Two Business Days Notification Required in the REF~7G of the 814_13. Adding "SHF" as a valid reject code in the REF~G7 of the 814_11. |
| 787 | Update the 814_04 REF~IX gray box. REF~IX is not optional when REF~MT = COMBO. |
| 788 | Clarification in the gray box of the REF~MR segment that only one REF~MR segment will be sent for each transaction. |
| 789 | This Change Control is to incorporate changes that will be put into place with changes to the Critical Care Form. |
| 790 | This Change Control is to add clarity to many different segments in various previous Change Controls: PER~PO segment, REF~1P segment and the REF~RAA segment. |
| 793 | This Change Control will update the "DC005" code of the 650_01 to make the Friday Authorization flag required in any disconnection request relating to nonpayment. |
| 795 | Change control 2011-781 left off the NM102 segment and the NM108 segments which are required for ANSI compliance. The change is to propose that the NM102 should be a C and the NM108 will be an EC. |
| 796 | This change control clarifies that several segments will not be provided in the 810_02 for the new “A5” Meter Tampering Charge invoice that was approved in 2010-755. |
